Interfacings/Fusible web

Heat'n'Bond Lite

Heat'n'Bond Lite

In stock

1.24

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The item will be sent as a single piece.

Width 43cm (17")

Heat'n'Bond Lite is a lightweight iron on adhesive that has a strong bond without adding extra weight or stiffness to a project. The solid sheet adhesive and paper backing allow designs to be drawn, traced or printed and then easily cut out. Once applied it is easily sewn through, making it ideal for multi-layer appliques, quilting or home decor.

Pre heat dry iron to "wool" setting without steam. Cut Heat'n'Bond to desired shape of material or motive. Lay Heat'n'seal paper side up on the wrong side of material. Guide iron evenly across paper side of fabric for approx 2-3 seconnds. Leave to cool.


Washable on delicate cycle. Tumble dry on low heat.

Heat'n'Bond ultra

Heat'n'Bond ultra

In stock

1.24

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The item will be sent as a single piece.

Width 43cm (17")

Heat'n'Bond is an ultra strong paper backed iron on adhesive which is ideal for applique and craft. Suitable for fusing thicker material together. Pre heat dry iron to "wool" setting without steam. Cut Heat'n'Bond to desired shape of material or motive. Lay Heat'n'seal paper side up on the wrong side of material. Guide iron evenly across paper side of fabric for approx 2-3 seconnds. Leave to cool.

Peel off paper backing. Place material adhesive side down in position on main fabric. Guide iron evenly across for 10 seconds. Allow to cool for approx 20 minutes.

Washable on delicate cycle. Tumble dry on low heat.

Vilene Bondaweb

Vilene Bondaweb

In stock

1.90

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The Bondaweb will be sent as a single piece.

Bondaweb® is a web adhesive on paper. The paper supports the web while drawing as well as ironing. With Bondaweb®, different materials and fabrics can be fused together by ironing, very easily. Bondaweb® is ideal for fancy appliqués (further information on the back page) and textile handicrafts in all forms and colours as well as for repairs. With Bondaweb® you can let your creative streak run wild!

Fabric: For almost all fabrics, raffia, cardboard and, at lower temperatures, also for leather

Advantages:
Double-sided adhesive
Accurate appliques
No shifting when zigzag-stichting

Method of use:

1. Draw the motif on the paper side of Bondaweb®. Cut out roughly.

2. Place Bondaweb® with the rough side on the wrong side of the fabric. Iron dry for 5 seconds.

3. Cut the motif out precisely, remove paper backing. With the coated side down place on the fabric.

4. With a damp cloth lightly iron each area for about 10 seconds.

5. To complete a process, stitch the application with a zig-zag stitch. For additional stability, place Stitch-n-Tear underneath when needed.

Care: Washable in temperatures up to 60 °C or dry cleanable

Colours / Measurements: Sheer. Width 45 cm with instruction

Vilene Decovil 1 Light

Vilene Decovil 1 Light

In stock

5.00

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The Decovil will be sent as a single piece.

Decovil I Light is a lighter and softer version of Decovil I.
It is a fusible nonwoven with leather-like handle, produced on the basis of a special technology.

Decovil I Light is ideally suited for many handicrafts and creative applications, for the creation of hats, belts, bags and small fabric bowls, etc.; but also, of course, for interior decoration.

Fabric: Decorative fabrics, cotton, synthetics, etc.

Advantages:
Dimensionally stable
resilient
tear resistant
non-fraying
resistant to bending
to be sewn well

Method of use:
First iron the fabrics at length with steam to avoid any shrinkage later on. Allow the fabrics to dry completely. Place the interfacing with the coated side on the wrong side of the fabric. Then cover with a damp cloth and press the iron carefully for about 6 seconds, step by step each area; iron setting: wool.
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable up to 40 °C in the gentle cycle or dry cleanable

Colours / Measurements: Beige. 90cm.

Vilene S520 Pelmet

Vilene S520 Pelmet

In stock

1.10

Quantity:

Please Note Price Quoted is per 1/4 Metre. If you wish to order 1 metres enter “4” as the quantity (4 x 1/4m = 1 metres). The item will be sent as a single piece.

Heavy weight fusible pelmet vilene. Ideal for creating sturdy pelmets & other furnishings. Very simple to iron and fuse to fabric.
Also ideal for crafts particularly bases of bags as it adds stability and is washable so once ironed the piece can be washed.

Fabric: Decorative fabrics, cotton, chenille etc.

Advantages:
Washable and dry cleanable pelmet interfacing
Smooth, fabric look
Retains shape
Comfortable to iron-on

Instructions
First iron the fabrics at length with steam to avoid any shrinkage later. Allow the fabrics to dry completely.
Place the interfacing with the coated side on the wrong side of the fabric.
Cover with a damp cloth and glide the iron over each area and press for about 15 seconds, without letting the iron move.
Iron setting: wool/cotton.
Slowly glide the iron with pressure and sporadic steam over each area.
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Wash flat in temperatures up to 40 °C in the gentle cycle or roll in a laundry bag and dry cleanable.

Colours / Measurements: White. 30cm

Vilene H410 Softline Iron-on Interfacing

Vilene H410 Softline Iron-on Interfacing

In stock

2.60

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The item will be sent as a single piece.

Soft, iron-on interfacing with stabilising threads along the grain. These threads also help even particularly soft fabrics to retain their shape. For the front sections and accessories of waistcoats, jackets and coats as well as for collars, pockets flaps etc.

Fabric: Light to heavyweight fabrics such as e.g. wool, raw silk or jersey

Advantages:
Retains perfect shape through threads along the grain
Comfortable to wear
Strong yet flexible feel

Method of use:
Important: the thread along the grain of the interfacing must follow the grain of the fabric. Place the interfacing with the coated side on the wrong side of the fabric. Cover the entire area with a damp cloth. Press each area for about 10 to 12 seconds, being careful not to move the iron. Iron setting: Wool/cotton.
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable in temperatures up to 40°C or dry cleanable

Colours / Measurements: White. Width 90 cm

Vilene Medium sew in interfacing:  White M12/312

Vilene Medium sew in interfacing: White M12/312

In stock

1.80

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The item will be sent as a single piece.

Width 90 cm (36")

Soft facing, universally usable for front parts of dresses, waistcoats, jackets and coats as well as collars, pockets, flaps, etc. Also ideal for use in lightweight jackets as a graft.

Fabric: Light to middle weight fabrics, e.g. Crash, Cloqué, pleated fabrics

Advantages:
Easy to sew
comfortable to wear
strong yet flexible feel

Method of use: Sew by hand or machine.

Care: Washable in temperatures up to 95 °C or dry cleanable


Vilene Stitch n tear 314

Vilene Stitch n tear 314

In stock

1.60

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The item will be sent as a single piece.

Width 90 cm (36")

To achieve accurate embroidery and snag free appliqué using the sewing machine. For the drawing or iron-on transfer of patchwork patterns. Also suitable for transferring and sewing quilting motifs.

Fabric: Usable for all fabrics

Advantages:
Accurate results
No stretching of the fabric
can be traced using a soft pencil

Method of use:
Baste a piece of Stickvlies somewhat bigger than the motif under the fabric and embroider. Mark out or transfer patchwork or quilt patterns with your iron. Then just remove the Stickvlies.

Vilene Light Fusible Interfacing F220/304

Vilene Light Fusible Interfacing F220/304

In stock

1.50

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The item will be sent as a single piece.

Simple interfacing, best suited for small parts such as collars, cuffs etc. on blouses and dresses.

Fabric: Lightweight fabrics such as cotton, polyester etc.

Advantages:
Simple to iron-on
Very comfortable
Also washable at higher temperatures

Method of use:
Place the interfacing with the coated side on the wrong side of the fabric. Cover the entire area with a damp cloth. Press each area for about 10 to 12 seconds, being careful not to move the iron. Iron setting: Wool / cotton.
Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly.
We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable in temperatures up to 60 °C or dry cleanable

Colours / Measurements: White. Width 90 cm

Vilene Medium Fusible Interfacing H250/305

Vilene Medium Fusible Interfacing H250/305

In stock

1.50

Quantity:

Please Note Price Quoted is per Half Metre. If you wish to order 1 ½ metres enter “3” as the quantity (3 x 1/2m = 1 ½ metres). The item will be sent as a single piece.

Stable iron-on Interfacing for shaped bands, shaped belts and handicrafts. Prevents stretching and ensures retained shape.

Fabric: Light to middle weight fabrics such as e.g. cotton

Advantages:
Simple to apply
Long lasting shape
Also washable at higher temperatures

Method of use:
Place the interfacing with the coated side on the wrong side of the fabric. Then using dry heat glide the iron firmly 5-6 times very slowly over each area of the insert, so that each area receives approx. 8 seconds of heat.
Iron setting: Wool.
Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of Interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable in temperatures up to 60 °C or dry cleanable

Colours / Measurements: White. Width 90 cm

Warm Company Steam-a-seam lite 2

Warm Company Steam-a-seam lite 2

In stock

3.50

Quantity:

Price per 1/2 meter

The #1 most loved brand of double stick fusible web, Lite Steam-A-Seam 2 is back and better than ever making appliqué fun again!! Lite Steam-A-Seam 2 is heat activated pressure sensitive fusible webs. This makes the web sticky and repositionable for easy placement of your appliqué giving you the ability to play with your design before permanently ironing.

You'll never make a mistake - the last step is to fuse when everything is perfectly in its place! Before fusing, tack your project to a wall or try on a garment to check appliqué placement; you're able to reposition pieces while you're wearing them.

Lite Steam-A-Seam is the incomparable lightweight fusible web that bonds the same as Steam-A-Seam 2 but with 1/2 the weight - Perfect for laces, ribbon, silk and chiffon!